- Fluoropolymer heaters.
Heaters covered with PTFE fluoropolymer offer excellent chemical resistance and versatility. The company offers an extensive selection of fluoropolymer heaters. With 13 standard catalog heater styles and hundreds of special configurations, the possibilities are virtually endless. Heater size range from 500 watts up to 27,000 watts from 120-160 volts. Thick ......
- High performance fluoropolymer
coatings.
High performance fluoropolymer coatings offer engineers and designers a diverse range of low friction, dry-lubricant materials suitable for a variety of applications. These coatings combine the unique capabilities of two 'engineering plastics'; fluoropolymers, which have the lowest coefficient of friction of any known solid, and organic polymers, which give coatings ......
- Consider Using Fluoropolymers in Biological Applications
HEADNOTE Even with the use of costly corrosion-resistant alloys, metal contamination continues to occur in the biologics industry, thus reducing product yield and activity. Fluoropolymers are emerging as a viable solution to this problem. THE BIOLOGICS INDUSTRY IS INVESTING SIGNIF -icant capital in switching from 316L stainless steel (SS) to ......
- Composites show introduces reinforcements, fillers
& additives.
* Pultrusion, filament winding, SMC, BM polymer concrete, and advanced composites are targets for new reinforcing fibers, fabrics, fillers, and other additives introduced at the recent Composites 2003 Show in Anaheim, Calif. The show was sponsored by the American Composites Manufacturers Association. We reported on new resins and initiators at ......
- Excalibur proves to be more than just a legendary
product
In a series of tests carried out by the National Centre of Tribology, Excalibur, the stainless steel fluoropolymer coating system frotu Whifford Plastics Ltd, UK, outperformed conventional fluoropolymer coatings. During reciprocating 'pinon-plate' friction and wear tests, these reinforced coatings were shown to have a specific wear rate up to 50 ......
- Product listings.
Raw Materials CHEMICAL SPECIALTIES Abrasives/Anti-Skid American Fillers and Abrasives/R.J. Marshall The Armakleen Company, Armex Div. Ceroglass Technologies, Inc. Clariant Corp., BS Plastics, Specialty Polymers BU E & B Inc. Maxi-Blast, Inc. Michelman Micro Powders, Inc. Nissan Chemical America Corp. Pacer Corp. Shamrock Technologies, Inc. Sukgyung A-T Co., Ltd. 20 Microns, ......
- Spatially resolved degradation in heterophasic
polymers by ESR imaging and FTIR: the case of propylene-ethylene
copolymers.
Heterophasic propylene-ethylene copolymers (HPEC) containing bis(2,2,6,6-tetramethyl-4-piperidinyl) sebacate (Tinuvin 770) as a hindered amine stabilizer (HAS) were thermally aged at 393 and 433 K. Two types of HPEC were examined, containing 25% and 10% ethylene (E), respectively, as ethylene/propylene rubber (EPR). Electron spin resonance (ESR) spectra of nitroxide radicals in HPEC ......