- Chasing nanocomposites: nano-size particles have
mega-potential in plastics because just a pinch does so much more than
heavy loadings of other additives. Three recent conferences presented
almost 200...
They are still in their infancy, but if the forecasts are right, nanocomposites could turn out to be the biggest little thing to hit plastics in decades. Polymers reinforced with as little as 2% to 5% of these particles via melt compounding or in-situ polymerization exhibit dramatic improvements in thermo-mechanical ......
- Nanocomposite nylons
IMAGE PHOTOGRAPH 1 Foster Corp., Dayville, Conn., offers a line of Selectively Enhanced Polymers (SEPs) using nano-sized clay additives to boost stiffness and rigidity in materials such as nylon 12. The 300 to 1,500-nm-long particles are less than 1-nm thick, giving them an extremely high length-to-thickness ratio - one said ......
- Patented nano-technology for wide range of
resins.
A recently patented nanocomposite technology reportedly enhances the mechanical properties of a wide range of commodity and engineering thermoplastics and thermosets. Foster Corp., Putnam, Conn., has commercialized this technology under the NanoMed brand. It is aimed primarily at medical devices such as intravascular or balloon-type catheters. The new technology uses ......
- Nylon Nanocomposites Are Both Stiff &
Tough.
A new family of nylon nanocomposites from Foster Corp., Dayville, Conn., reportedly offers a balance of high stiffness and elongation. Increased stiffness without brittleness allows for uses in thin-wall applications such as tubing and film. Foster serves medical, electronic and other industrial niche markets. The new family is based on ......
- Nano-sized additives for a stiffer design
Materials engineering Nano-sized clay additives boost stiffness and rigidity of olefin elastomers and nylons without compromising their elongation or toughness. The 300 to 1,500-nmlong particles are less than 1-nm thick giving them an extremely high length-to-thickness ratio - one unmatched by traditional glass, carbon, or mineral reinforcements. The high aspect ......
- Materials. (Classified Directory)
(S-O).
SYNDIOTACTIC POLYSTYRENE (SPS) LNP Engineering Plastics Inc., PA RTP Co., MN THERMOPLASTIC ELASTOMERS Olefinic Type Acrymax Technology Inc., PA Advanced Compounding, Div. of Blessings Corp., CT * Advanced Elastomer Systems, OH * Advanced Polymer Alloys, DE AIN Plastics, Inc., A subsidiary of Thyssen NA., NY (D) Alliance Alloys LLC, MA ......
- New foam extrusion technology is 'environmentally
friendly.'
The first commercial application of a new inert-gas foam extrusion technology is expected to hit the market later this year. Last September, Plastic Extruded Products Co. (PEPCO) in Hillside, N.J., began commercial scale-up of a process that was developed over the last two years by the Polymer Processing Institute (PPI) ......