Small Business Resources, Business Advice and Forms from AllBusiness.com

San Andreas Resources - 43 per cent combined zinc/lead assay grades reported on step out hole...

VANCOUVER, BC--(BUSINESS WIRE)--AUGUST 28, 1995--SAN ANDREAS RESOURCES (TSE:SAO) San Andreas Resources Corporation announces that the 3.9 metre vein intersection in diamond drill hole PC-95-109 assayed 22.9 per cent Zn, 20.4 per cent Pb, 244 gm/t Ag and 0.5 per cent Cu. This intersection is on Section

2424 N at an elevation of 662 metres. Details of the assay results on this intersection are provided in the table below. -0-

PC - 95 - 109 (Section 2424N)

     DEPTH       INTERVAL             ASSAY
   (metres)      (metres)    Zn       Pb      Ag     Cu
 From      To              percent  percent  gm/t  percent
______  ______   ________  _______  _______  ____  _______

 602.0   602.3     0.3       4.9     19.4    152.4    0.1
 602.3   604.2     1.9      32.3     22.3    211.7    0.4
 604.2   605.9     1.7      15.6     18.4    296.2    0.7

WEIGHTED AVERAGE
 602.0   605.9     3.9      22.9     20.4    244.0    0.5
___________________________________________________________

As reported in the Company's press release on August 16, 1995, hole PC-95-109 together with holes PC-94-90, PC-95-95 and PC-95-99 have extended the total strike length of the Zone 3 vein to circa 1.48 km or 630 metres to the north from the last hole completed in 1994. A long section which illustrates the expanded strike length of the vein is attached. At the end of 1994, geological resources on the property were 6.2 million tonnes of which 4 million tonnes of 12.0 per cent Zn, 14.3 per cent Pb, 218.2 gm/t Ag and 0.4 per cent Cu was contained within the main vein in Zone 3 with a strike length of circa 850 metres.

The vein structure remains open to the north and a further step out hole is currently being drilled 200 metres to the north of hole PC- 95-109. -0-

NOTE: Diagram of Prairie Creek Project ZONE 3 available from the Company at the phone number listed above.

CONTACT: Tony Millar, Chairman & CEO

(UK) 011-44-1252794740

or

David Elgee, President

(Canada) (604) 688-2001

In addition, make sure to read these articles: