Technical Committee Chairs Appointed

Between the Fall 2004 ACI Convention in San Francisco and the Spring 2005 ACI Convention in New York City, the Technical Activities Committee (TAC) selected 50 Chairs for ACI technical committees and TAC subcommittees. The majority of the actions became effective after the recent convention.

Fifteen

TAC Technology Transfer Committee: Emmanuel K. Attiogbe, Degussa Admixtures, Inc., Cleveland, OH. Replaces Richard N. White, Cornell University, Ithaca, NY.

116, Terminology and Notation: M.R. Hansen, South Dakota School of Mines and Technology, Rapid City, SD. Replaces Mark D. Luther, Holcim (US), Inc., Chesterfield, MO.

209, Creep and Shrinkage in Concrete: Carlos Videla, Pontificia Universidad Catlica School of Engineering, Santiago, Chile. Replaces David B. McDonald, USG Corp., Libertyville, IL.

221, Aggregates: Mark R. Lukkarila, Spec Mix, Inc., Mendota Heights, MN. Replaces Margaret H. Reed, Wiss Janney Elstner Associates, Northbrook, IL.

222, Corrosion of Metals in Concrete: Mohammad S. Khan, Professional Services Industries, Inc., Fairfax, VA. Replaces Charles K. Nmai, Degussa Admixtures, Inc., Cleveland, OH.

231, Properties of Concrete at Early Ages: Will Hansen, University of Michigan, Ann Arbor, MI. Replaces Joseph J. Biernacki, Tennessee Technological University, Cookeville, TN.

303, Architectural Cast-in-Place Concrete: Chris A. Forster, Morley Builders, Santa Monica, CA. Replaces Daniel P. Dorfmueller, D.P. Dorfmueller Co., Inc., Lebanon, OH.

305, Hot Weather Concreting: James N. Cornell, II, The Beck Group, Dallas, TX. Replaces Philip Brandt, Euclid Chemical Co., Charlotte, NC.

313, Concrete Bins and Silos: Stephen G. Frankosky, Ibberson Engineering, Inc., Hopkins, MN. Replaces William H. Bokhoven, Todd & Sargent, Inc., Ames, IA.

359, Concrete Components for Nuclear Reactors: Todd C. Inman, Santa Clara Valley Water District, San Jose, CA. Replaces Michael F. Hessheimer, Sandia National Labs, Albuquerque, NM.

360, Design of Slabs on Ground: Wayne W. Walker, Structural Services, Inc., Norcross, GA. Replaces Arthur W. McKinney, McKinney and Co., Ashland, VA.

365, Service Life Prediction: Tracy D. Marcotte, CVM Facilities Renewal, Wayne, PA. Replaces Michael D.A. Thomas, University of New Brunswick, Fredericton, NB, Canada.

522, Pervious Concrete: Matthew A. Offenberg, Rinker Materials, Orlando, FL. Replaces Dan R. Brown, Holcim (US), Inc., Duluth, GA.

546, Repair of Concrete: Paul E. Gaudette, Wiss Janney Elstner Associates, Inc., Chicago, IL. Replaces Jay H. Paul, Klein & Hoffman, Inc., Chicago, IL.

550, Precast Concrete Structures: Thomas J. D'Arcy, Consulting Engineers Group, Inc., San Antonio, TX. Replaces Vilas S. Mujumdar, National Science Foundation, Arlington, VA.

CHAIR REAPPOINTMENTS

In addition, the Chairs of the following 35 technical committees were reappointed to new terms that began at the conclusion of the ACI Spring 2005 Convention:

TAC Repair and Rehabilitation Committee: James E. McDonald, Engineering Consultant, Clinton, MS.

118, Use of Computers: Larry D. Church, Walker Parking Consultants, Elgin, IL.

120, History of Concrete: Luke M. Snell, Southern Illinois University at Edwardsville, Edwardsville, IL.

211, Proportioning Concrete Mixtures: Frank A. Kozeliski, Gallup Sand and Gravel Co., Gallup, NM.

215, Fatigue of Concrete: Kolluru V. Subramaniam, City College of New York, New York, NY.

223, Shrinkage-Compensating Concrete: Kevin A. MacDonald, Cemstone Concrete Products, Mendota Heights, MN.

224, Cracking: Robert J. Frosch, Purdue University, West Lafayette, IN.

229, Controlled Low-Strength Materials (CLSM): Frances A. McNeal-Page, Materials Consultant, Mesquite, TX.

236, Material Science of Concrete: Chiara F. Ferraris, National Institute of Standards and Technology, Gaithersburg, MD.

237, Self-Consolidating Concrete: Joseph A. Daczko, Degussa Admixtures, Inc., Cleveland, OH.

301, Specifications for Concrete: W. Calvin McCall, Concrete Engineering Specialists, Charlotte, NC.

306, Cold Weather Concreting: Charles J. Korhonen, U.S. Army Cold Regions Research and Engineering Laboratory, Hanover, NH.

308, Curing Concrete: Cecil L. Jones, North Carolina Department of Transportation, Raleigh, NC.

325, Concrete Pavements: Norbert J. Delatte, Cleveland State University, Cleveland, OH.

334, Concrete Shell Design and Construction: David B. South, Monolithic Constructors, Italy, TX.

336, Footings, Mats, and Drilled Piers: Diane M. Campione, Alfred Benesch & Co., Chicago, IL.

341, Earthquake-Resistant Concrete Bridges: Raj Valluvan, Parsons Transportation Group, Indianapolis, IN.

342, Evaluation of Concrete Bridges and Bridge Elements: Rita K. Oglesby, H.S. Kwoh & Associates, Inc., St. Petersburg, FL.

343, Concrete Bridge Design: Bruce C. Kates, Jacobs Civil, Inc., St Louis, MO.

346, Cast-in-Place Pipe: Curtiss W. Gilley, Terrain Engineering, Inc., Davis, CA.

347, Formwork for Concrete: Pericles C. Stivaros, Feld Kaminetzky & Cohen, Roslyn Heights, NY.

349, Concrete Nuclear Structures: Ronald J. Janowiak, Exelon Corp., Warrenville, IL.

357, Offshore and Marine Concrete Structures: Michael J. Garlich, Collins, Inc., Chicago, IL.

370, Short Duration Dynamic and Vibratory Load Effects: Darrell D. Barker, ABS Consulting, Inc., San Antonio, TX.

375, Performance-Based Design of Concrete Buildings for Wind Loads: Joseph M. Bracci, Texas A&M University, College Station, TX.

423, Prestressed Concrete: Bruce W. Russell, Oklahoma State University, Stillwater, OK.

437, Strength Evaluation of Existing Concrete Structures: Antonio Nanni, University of Missouri, Rolla, MO.

439, Steel Reinforcement: Conrad Paulson, Wiss Janney Elstner Associates, Chicago, IL.

440, Fiber Reinforced Polymer Reinforcement: John P. Busel, American Composites Manufacturers Association, Eastchester, NY.

445, Shear and Torsion: David H. Sanders, University of Nevada, Reno, NV.

447, Finite Element Analysis of Reinforced Concrete Structures: Laura N. Lowes, University of Washington, Seattle, WA.

523, Cellular Concrete: Edward M. Glysson, Elastizell Corp. of America, Dexter, MI.

530, Masonry Standards Joint Committee: Richard E. Klingner, The University of Texas at Austin, Austin, TX.

548, Polymers in Concrete: Michael S. Stenko, Transpo Industries, Inc., New Rochelle, NY.

555, Concrete with Recycled Materials: Christian Meyer, Columbia University, New York, NY.